#MAC NETWORK SETTINGS ROUTER SUBNET MASK MANUAL#

It can be one of these 3 options:Дynamic IP Address вЂ“ Choose this option to obtain an IP address automatically from your ISP (For most Cable modem users). This is the place you set public IP address provided by your ISP in order to access Internet. You will then log on to the router web-management page.

#MAC NETWORK SETTINGS ROUTER SUBNET MASK MANUAL#

The IP addresses that I used above is just for INITIAL router configuration.ДЄfter that, the logon screen will pop up, type in default user and password you found in router manual also. Again, you can then configure the router with other IP as according to your IP logical network design.

ThatвЂ™s why I said itвЂ™s important to read the manual.ДЇor the computer that derectly connect to the router, you need to set computer's IP in the network that same as network router, so you can only access and configure it. This IP address is factory default IP assigned to the router, you will be able to find it in network router manual. Then open your popular web browser (Internet Explorer, Opera, Netscape Communicator, etc), and type and press 'Enter'. The router I'm using is D-Link's DI-604 broadband router. Now we are going to configure this router on one of the computer connected to this router using straight network cable directly. You will be notified of firmware update, security alert and also product related information. I will explain some important and common setting which will be found in most of the routers from different vendors, so you can use wizard to start the installation and then check out the details here.ДЄlso register your product at vendor website if possible. Sometimes the vendor will prepare some quick setup wizard to expedite router configuration, but IвЂ™m not going to explain this method here.

Mac network settings router subnet mask